Aquastar 8in. Retrofit Hockey Puck Sumpless Suction Outlet Cover - Black #R8HP102

This item has been discontinued by the manufacturer. Alternative is R8MF102.

Features
For single or multiple drain use in existing frames and sumps
Single
Floor/wall: 224 GPM at 6.3 fps
Floor/wall: 74.3 GPM at 1.5 fps
No sump required
15.8 square inch opening
Three sets of different stainless steel screws
Manufactured from superior UV-resistant engineered polymers
Easily and safely retrofits most brands‚’ existing 8" frames and sumps that the 8HPxxx does not fit
Patent-pending Flow-Star‚® technology
Meets or exceeds NSF 50/ASME/ANSI A112.19.8a-2008 national standards and ASTM G154 UV testing
Listed with IAPMO R&T
Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater

Special Notes

• 6HP, 8HP & R8HP MAX Flow is 224 gpm allowed for both floor and wall with 2"or greater pipe sizes
• When 1.5" pipe size is used, max flow rate allowed for the 6hp, 8hp & r8hp is 177 gpm and 122 gpm for floor and wall respectively
• 4HP max flow is 56 gpm allowed only for wall applications
• 4SPA is for use in self-contained, factory-manufactured portable spas and hot tubs only and for multiple drain use only. Flow rate above is for two suction outlets.
• No sump is required. Aquastar's "Sumpless series" are designed and tested for safe flush-mount installations to tile, fiberglass, Acrylic, vinyl and steel as well as plaster, pebble, concrete, etc.
• ABS bulkhead adapter fitting must be securely attached to plumbing with proper glue. Use abs to PVC transitional glues (such as: Oatey ‚® ‚ Weld-on ‚® and other green NSF glues)
• DO NOT use clear, "hot", "blue" or any fast set glues with any AquaStar pool products
• Especially when retro-fitting, extra secure installations can be obtained by applying wet and dry epoxy, silicone, etc. to underside of base plates.
• After installation of bulkhead adapter fittings, if a gap exists between pool finish and base of cover it must be filled in with a 2-part epoxy to avoid finger or other entrapment.